Can Grok tune an engine?

[Goatpoker]

Messing around with Grok last night and asked for an ignition table for an LS3 with an LSA supercharger and 9psi boost. Using 100 octane. What do you think of th

 

[daveH]

looks nice but i wouldnt run that much timing on your specs. even too much for an NA LS3.

 

[Goatpoker]

Yeah, seems like 32deg is a bit aggressive. But maybe my 24.5 isn’t quite aggressive enough.

 

[Jersey_Jeff73]

im no tuner but why does the table start at 40 kpa

 

[Jersey_Jeff73]

my tune anot 10 lbs with a whipple 2.9 ls6 stoker pump gas. i think im alot more conservative than you

 

[Goatpoker]

Here’s my actual table. Slightly more conservative than yours I think. I’m looking to get more pull in the midrange… which is what I asked Grok to do
I’m just using different units than you, psi vs. kpa

 

[lincster]

That is wayyyyy to much timing.
I am at 22 degrees max with 50/50 race.
My tuner won't go above 24-26 even with 100% race.

 

[Jtmoney714]

I’m at 26* all in on an NA car with E85. Grok will scatter that motor on the first hard pull.

 

[South Bay]

Now do Chat GTP

 

[Rockwood]

Why is timing highest around torque peak, then drops off with RPM? Shit's opposite land...

 

[MWB]

Sure Grok can tune an engine but can it tuna fish

 

[Goatpoker]

Asking ChatGPt now. I think it’s a little tone def.
“Your table gives it 16°, which is extremely retarded for that load and RPM.”

 

[Goatpoker]

ChatGPt version

 

[Rockwood]

ChatGPt version

View attachment 167076

 

[Rockwood]

28* of timing at 9psi and likely torque peak RPM is wild.

 

[Jtmoney714]

28* of timing at 9psi and likely torque peak RPM is wild.

It’s not showing you it has 20* of knock retard. So it’s fine as is lol.