My 2006 Wuerth Motorsports Build

[602evo]

Now you can lead our night rides! Props to you for running the old school look!

definitely want to do more night rides this season!

 

[lincster]

definitely want to do more night rides this season!

Nothing good happens after dark.

 

[602evo]

Dropped the chassis and other components off at Powder last Friday! The chassis, suspension components, light rack are all getting done in the same semi gloss black.

spent Thursday night getting the front arms ready. There was a spot near the uniball cup that wasnt welded originally, so completed this. as well as added some weld material over some areas on the lower arms where the original spindles had rubbed the arms. Also fininished welding some tabs onto the engine cage removable section since i will have a skid plate that goes up to where the engine cage starts to bend in the back!

 

[Funco4JM]

Cutting it close my friend! Gonna have to throw that thing together quick lol.

 

[602evo]

Cutting it close my friend! Gonna have to throw that thing together quick lol.

Haha! Luckily the lead time for powder was only a week or 2! so hopefully not tooo bad!

 

[Rockwood]

Dropped the chassis and other components off at Powder last Friday! The chassis, suspension components, light rack are all getting done in the same semi gloss black.

spent Thursday night getting the front arms ready. There was a spot near the uniball cup that wasnt welded originally, so completed this. as well as added some weld material over some areas on the lower arms where the original spindles had rubbed the arms. Also fininished welding some tabs onto the engine cage removable section since i will have a skid plate that goes up to where the engine cage starts to bend in the back!

Was the weld on the tube (not the cup) on the arm a crack? If so, gonna add something over the top to keep it from cracking again?

 

[602evo]

Was the weld on the tube (not the cup) on the arm a crack? If so, gonna add something over the top to keep it from cracking again?

It was from the arm rubbing the spindle due to too much steering. needed a stopper in the gearbox of some sort. It had the same issue on both sides. But now with the tatum spindles, and clearancing them a bit, im hoping the issue is gone. I will add a stopper in the steering box if needed.

Here's how it looked prior to filling it in:

 

[Rockwood]

It was from the arm rubbing the spindle due to too much steering. needed a stopper in the gearbox of some sort. It had the same issue on both sides. But now with the tatum spindles, and clearancing them a bit, im hoping the issue is gone. I will add a stopper in the steering box if needed.

Here's how it looked prior to filling it in:
View attachment 155483

Someone needed a turning brake.

 

[602evo]

Here's a few pics of everything after sand blasting! Next up is Powder!