Search results

not only sit by it for hours after everyone else goes to bed....when I was younger I would make two campfires and fall asleep on the ground in between them--just awesome but this old man now needs a bed to sleep on

Which link ecu? Pics. 10 years ago e85 injectors were not available. You probably have regular petrol injectors. Once clogged they will never be ok. Why? Because injectors back then had some other materials in them that are not e85 friendly. It will only go downhill from here. You should...

Impressive!

That’s smart!

there is no "base fuel pressure" it can be what ever you want it to be and tune from there. typical Subaru regulators are 3 bar (43.5psi with no vacuum hose connected) fuel pressure can be adjusted up or down just like you can pick smaller and bigger injectors. if you have too small of...

Studies show that 80% of new year resolutions are abandoned by February but regardless of good intentions what are you committing to do? Mine is to do the dishes more often, keep paying for pool service, even though I think “ how hard can it be” build my 2500 sqft stand alone metal building...

2025 was a great year for my family and business. Hoping for the same this year. God bless you and your families for a spectacular New Year

Simply measure the inside width of the new one. Tell your supplier what hiem you’re using and see how close he can get to that measurement. If he can’t get there you may need to use a thin shim or two

God is great! Beautiful

on my own S5 with 935's i torque mine to 100 ft-lbs dry--never had a problem

Here’s the car The nose cone mount looks easy. Make a plate that welds to the front of the cross tube rather than the top of tube. Then the motor mounts could go on the back side of the back tab and simply add one more tab per side. That just happens to be 1.75”. Almost the exact added length...

The S4 main case is 15.5” long. The S4D main case is 17.25”. So 1.75 longer overall and I am assuming that 50% on both sides of the center of the drive flanges. That = 7/8” both directions of the diff

SEAN thanks for the reply, i gathered most of that above, but to confirm let me ask it a different way: if I was to be able to mount the drive flanges in the exact position they are with the S4, then............ axle length would not need to change? (drive flange from flange to flange is still...

Church, Making ginger bread houses with the grand kids, watching a little football

If the guy has an s4 with a cracked case and bad ring and pinion I am assuming you could buy the s4D case and ring and pinion and add side plates, drive flanges, diff and bellhousing and use all the gears and intermediate case from old trans? Is there something I’m missing

As in you blew your tranny? How is the sand conditions? Heard big wind is coming

That’s cool!

That thing is cool!

Just installed the four wooden door signs I had made for Christmas for my wife’s chicken condo. Later going to see 3 of my grandchildren get baptized on the same day. From three different families. All 8 years old. Went to the Tyler mall near corona. They have a Vending machine there that “...

From those dimensions it doesn’t show there is any upward movement of “ drive flange center to input shaft center. They look the same. Only the belly of the bellhousing appears to go down a bit more. Can we see the whole dimensions I do see where the motor would be set back an inch.