Search results

  1. J Alper

    BUGGY ROUNDUP 13TH ANNUAL

    Myself and @Justdirt will be there, @Pennywise you going ?
  2. J Alper

    BUGGY ROUNDUP 13TH ANNUAL

  3. J Alper

    BUGGY ROUNDUP 13TH ANNUAL

  4. J Alper

    BUGGY ROUNDUP 13TH ANNUAL

    I think this will be my 6th year, never a disappointment, Great meeting same minded people, lots of rides, If you have never been and afraid of not going because you do not know anyone, everyone is awesome, hit me up will be out at Dumont on Wednesday, easy to get to, 27 miles outside of...
  5. J Alper

    My First Sand Rail! (Revenge Racing Silencer)

    Congratulations on your car Smart move on the sequential, my Sequential has only replaced one gear in the last 15 years and on the same ring and pinion, when i had a 2d, it was wiped out every other year,
  6. J Alper

    Mefi 4b help electrical issue

    On the Case of the Mefi, grind off the Paint on one of the mounting bolts and run a ground wire from the case to the chassis
  7. J Alper

    Extra Wide Trailers?

    What is nice about the Universal is that the door opening on a standard 102'' trailer is 98'' I have a 102'' door opening and the trailer is 106'' wide, Call Universal or Sport Trailers, http://sporttrailersonline.com/ https://universaltrailers.com/
  8. J Alper

    Whistlin Diesel Arrest

    I dont know have a hard time believing this for $500
  9. J Alper

    2” hollow upgrade

    @parker@gearone make really nice 2'' hollow brakes,
  10. J Alper

    2” hollow upgrade

    I think we have a couple of post on the board we have done over a 100 conversations, Yes you can keep the same upright we can convert your spindle to a 2'' hollow spindle, the most affordable is RBP for brakes,
  11. J Alper

    Camshaft

    We mostly use cams from CamMotion, due to the lobe design, we stay away from Texas Speed it is to harsh of a lobe beats on the valve train, I would do a around a 238/244 on a 112 if you want it to lope, if you want a smooth idle then stay closer to a 114-114 lsa, Most of the 44) I get into...
  12. J Alper

    Gear indicator potentiometer for Generation 1 S4 tranny

    They sell Gen1 from Kartek https://www.kartek.com/parts/replacement-novotechnik-potentiometer-with-3-pin-deutsch-connector-and-billet-mount-for-mendeola.html this is what you will need, They are out of stock, at Kartek but weddle has them, you run 5v of the holley, they that will cut the...
  13. J Alper

    Weekend Warrior Rear Bed Removal

    I have a full Topic under toyhauler modifications, raised the bed up around 4-6'' for a full size sandcar,
  14. J Alper

    In need of VW PBS S4 bell housing.

    Sean it will need a input shaft also, is that correct,
  15. J Alper

    RV Tires life expectancy

    Sailun Trailer Tires i change out every 6 years
  16. J Alper

    Sequential shifter - does it need the limit stops?

    It really depends on your driving style, i bang the gears so hard i have bent the stops on our shifter, and other time just driving normal i dont hit the stops, So it just depends how aggressive of a driver you are
  17. J Alper

    S4 breather

    Not sure where or how you drive, we go to Dumont and St Anthonys, the hills are steep, I set mine up with multiple breathers, one is on the front of the trans using a 4an line, but going down hill that is going to get clogged with oil and plug then push out the oil, I also have one on the...
  18. J Alper

    2005 Moho Chevy 8.1 Fuel line replacement

    that is what @ChasingSand was explaining, that they make GM-Flare to AN fittings, pretty standard just measure the size of line, it will be a 3/8 or 5/116 ect...
  19. J Alper

    Antigravity battery or any other lithium variant

    I have a couple of cars we are prepping, and the optima mount is welded in Anyone use the XS batteries, they have a group 34, and the specs seem a lot higher than the Full throttle,
  20. J Alper

    Water line routing

    It will work better in the Run it down here area.
Back
Top